Triple-Acting Sucker Rod Pump
Triple-Acting Sucker Rod Pump
The raw material of triple-acting rod pump parts should be inspected after heat treatment, the mechanical properties, chemical compositions and metallographic structures must be inspected by batch. The triple-acting rod pump parts should be inspected several times during the processing procedure. Some key points like the outer diameter of the plunger and the inner diameter of the pump barrel should be 100% inspected.
⦁ 25 years Triple-acting sucker rod pump manufacturing experience
⦁ The strictest quality standards on Triple-acting sucker rod pump
⦁ Full support on your customised requirement
The special structure of this product makes it possible to complete three oil suction and three oil discharge actions in one reciprocating stroke, which can realize multi-layer oil wells.
1) The three-action pump divides the entire pump into three sealed chambers A, B, and C, which have suction and discharge functions respectively;
2) The pump itself is equipped with an isolating switch, which is used in conjunction with the pump, and the operation is simple and reliable;
3) The biggest feature: 57 pump load, 82.5 pump displacement, great energy saving.
1) Suitable for oil wells with ordinary oil pumps;
2) Oil wells that can realize double-layer exploitation;
3) High-yield liquid oil wells.
4) It is especially suitable for deep wells with large displacement and replacement of 83 oil wells.
What Our Client Say About Sanjack Petro?
Be An Expert When Importing Petroleum Equipment
Check All Guides
OCTG Tubing Guide- Specifications and Grade of steel
- PSL1 or PSL2
- Corrosion and wear conditions
Steel Tubing Pipe Guide- Specifications and Grade of steel.
- PSL1 or PSL2
- Corrosion and wear conditions.
Vacuum insulated tubing Guide- Specifications and Grade of steel.
- The connection type.
- Working temperature.
Tungsten Coated Tubing Guide- Corrosive composition
- Abrasion condition
- Working temperature.