Superheated steam injection boiler

Since 1986, the (General Machinery Plant) Sanjack Petro’s former has obtained the qualification for manufacturing Class I and II pressure vessels.

Now the SANJACK ‘s special equipment has the national A2 level (Ⅰ, Ⅱ, Ⅲ) pressure vessel manufacturing qualification; D-level pressure vessel design qualification; A-level boiler manufacturing, installation, alteration, repair & maintenance qualification; American Society of Mechanical Engineers ( ASME) U and S stamp qualifications.

Superheated steam injection boiler

The working fluid (water) pressure in the boiler is lower than the critical pressure and temperature : 22.12MPa 374.15 ℃ is called the subcritical boiler.

 

1-Inlet pipe

2-High-pressure pump

3-Control cabinet

4-Power cabinet

5-Fan 6-Burner

7/8-Hot air duct

9-Chimney

10-Air preheater

11-Convection heat exchange section

12-Overheating section

13-Main steam valve

14-Steam-water separator

15-Ladder   16-Transition

17-Radiation section outlet pipe

18-Radiation section

 

Superheated steam injection boiler Features:

  1. The structure and control are more complicated than ordinary boilers, and its one-time investment is higher;
  2. The enthalpy value of superheated steam is high, the steam injection efficiency is higher, the oil production volume in the steam huff and puff period is 1.2 times that of ordinary boilers, and the oil-steam ratio is 2.3 times that of ordinary boilers;
  3. The mixing/overheating process is carried out in the non-heated section outside the boiler, and the safety is guaranteed.
  4. The water quality requirements are equivalent to subcritical boilers, lower than supercritical boilers;

 

 

2 sets SJYZG 15-21-D boilers provide steam injection services for Sudan’s PE oilfield, with a cumulative gas injection of 30,000 cubic meters;

steam-boiler-sanjack

Sanjack Group provides Steam injection solution and equipments for the Albanian PM oilfield, including 15 tons of boilers, thermal recovery wellhead equipment , thermal insulation pipes and other supporting equipments, providing around 10,000 m³ injection services;

Feature Products

OCTG Casing
-
  • OCTG Tubing and Casing.
  • OCTG Casing.
OCTG Tubing
-
  • OCTG Tubing and Casing.
  • OCTG Casing.
OCTG Tubing
-
  • OCTG Tubing and Casing.
  • OCTG Casing.
OCTG Tubing
-
  • OCTG Tubing and Casing.
  • OCTG Casing..
  • What Our Client Say About Sanjack Petro?

  • Be An Expert When Importing OCTG Tubing & Casing

    Check All Guides

    OCTG TUBING AND CASING
    OCTG Tubing Guide
    • Specifications and Grade of steel
    • PSL1 or PSL2
    • Corrosion and wear conditions
    Steel tubing pipe
    Steel Tubing Pipe Guide
    • Specifications and Grade of steel.
    • PSL1 or PSL2
    • Corrosion and wear conditions.
    VACUUM INSULATED TUBING CHINA
    Vacuum insulated tubing Guide
    • Specifications and Grade of steel.
    • The connection type.
    • Working temperature.
    TUNGSTEN COATED TUBING
    Tungsten Coated Tubing Guide
    • Corrosive composition
    • Abrasion condition
    • Working temperature.