Anti-Sand Pump For Heavy Oil Recovery
Anti-Sand Pump for Heavy Oil Recovery
Sucker rod pump facility was established in 1964, and it has been more than 50 years. Sanjack has rich production experience and strong R&D capabilities. Related products include various series of tubing pumps, rod pumps and special rod pumps. Double-Acting Sucker Rod Pump can be in a working cycle to complete two oil suction and discharge process. This type of oil well pump is specially designed for heavy oil recovery and has the following characteristics:
- Suitable for wells with viscosity of crude oil≤4000Mpa.s;
- Suitable for wells with sand cut≤1.2%；
The all-metal heavy oil tubing pump maximizes the flow area of the entire pump. Increased oil passages by up to 44% improve pump filling and plunger drop, resulting in increased heavy oil production. The pump combines heavy-duty construction with the largest bore for any given tubing size to maximize output. The one-piece pump barrel requires no joints and is precision honed from end to end to ensure a perfect plunger bore for efficient pumping.
These pumps are suitable for the following applications:
• Heavy-oil wells
• Wells where greater capacity is needed in a given tubing size
• Wells of moderate depth with severe pumping conditions
• Wells with scale problems
• Deep wells
• Heavy-oil wells
• Wells where greater capacity is needed in a given tubing size
• Wells of moderate depth with severe pumping conditions
• Wells with scale problems
• Deep wells
These pumps are suitable for the following applications:
• Heavy-oil wells
• Wells where greater capacity is needed in a given tubing size
• Wells of moderate depth with severe pumping conditions
• Wells with scale problems
• Deep wells
These pumps have the following features and benefits:
• Maximize the flow area of the entire pump, as well as the stroke through design, to optimize the efficiency of heavy oil recovery.
• Thick-walled one-piece barrel with special barrel coupling provides good sealing and superior assembly strength and rigidity, improving environmental adaptability
• Full barrel, stroke-through design with the largest possible hole diameter, suitable for any size tubing to increase production.
• Wide range of component materials so the pump can be tailored to any environment to improve cost efficiency and pump life.
• Special pump accessories expand the application range of the pump, providing greater versatility, adaptability and use value.
What Our Client Say About Sanjack Petro?
Be An Expert When Importing Petroleum Equipment
Check All Guides
OCTG Tubing Guide- Specifications and Grade of steel
- PSL1 or PSL2
- Corrosion and wear conditions
Steel Tubing Pipe Guide- Specifications and Grade of steel.
- PSL1 or PSL2
- Corrosion and wear conditions.
Vacuum insulated tubing Guide- Specifications and Grade of steel.
- The connection type.
- Working temperature.
Tungsten Coated Tubing Guide- Corrosive composition
- Abrasion condition
- Working temperature.